Display Unit in Decent Condition with minor scuffs
The cool, cosy atmosphere of a jazz club, or the experience of being right there in the moment at the front of the stage. Sound that will envelop and surround you. Sound that makes you feel like you can almost reach out and touch it.
These 3 way speakers feature two hefty 165mm bass drivers in an extended bass shelf alignment, providing deep, tight bass. A dynamic non-fatiguing vocal mid-band is delivered by a 130mm midrange, and lucid, detailed highs come from the 25mm super audio tweeter with an extended frequency response to 40kHz.
Producing a truly natural, all-encompassing sound, the Harmonix Mk2 features front facing ports which allow the speaker to be pushed up against a wall without compromising sound quality. They are also timbre matched with all Krix speakers for surround sound fidelity and come in a range of elegant cabinet finishes for definitive style and flexibility. Listed price is for standard Black imitation woodgrain finish.
Key Features:
2 x 6.5" bass drivers
1 x 5" mid driver with 1" dual concentric diaphragm tweeter with double magnet shielded
Power Handling: 50 - 250 Watts RMS recommended amplifier power
Nominally 6 Ohms (minimum 3.1 Ohms)
35Hz - 40kHz in room response
Rear vented enclosure
Dimensions: 1040mm high x 220mm wide x 350mm deep (including feet)
Weight: 28Kg each cabinet
| Specs |
Frequency Range 35Hz - 40kHz in room response
Power Handling 50 - 250 Watts RMS recommended amplifier power
Sensitivity 90dB for 2.83 volts at 1 metre
Configuration 3-way
Bass Drivers 2 x nominal 165mm (6½”) laminated polypropylene cones. 33mm (1¼”) voice coil wound on high powered aluminium former, with ventilated spider and aluminium flux stabilisation ring for low distortion
Midrange Driver 1 x nominal 130mm (5″) coated paper cone. 26mm (1″) voice coil wound on high powered aluminium former, using copper shorting ring and oversized magnet for lower distortion
Tweeter 25mm (1″) dual concentric diaphragm with wave-guide centre plug for controlled directivity. Non-reflective dual chambered magnet structure with copper shorting ring to lower distortion
Impedance Nominally 6 Ohms (minimum 3.1 Ohms)
Enclosure Type Dual chambers - sealed midrange chamber, with bass reflex main chamber, front vented with internal / external flaring
Dimensions 1040mm high x 220mm wide x 350mm deep (including feet)
Finish Choice of Timber Veener or Vinyl Woodgrain
Weight 28kg each
|
