Krix

Krix MX-30 Modular

$23,995.00
  • krix mx-30

This product is not able to be ordered online but can be purchased in our Brisbane store or over the phone.

Please call us on (07) 3552 7000 or use the 'Enquire Now' form below to send an enquiry.

 Please note due to Krix's Policy this can only be sold if we install.

 

Featuring commercial cinema components, the Krix MX-30 provides a crisp, clear, realistic sound, with such power and precision it will make your hair stand on end.

 

Created for larger home cinemas measuring five to fourteen metres long, the MX-30 features five modules, all of which are the same height and slim-line depth for easy installation into one cavity. The front baffle of each module is covered with an acoustic absorbent material to absorb any sound reflecting off the back of the screen or the room itself. This assists greatly with the acoustic treatment of the room to ensure better intelligibility and overall sound performance.

 

The main speakers utilise a single 380mm, high stiffness, paper cone mid-bass driver with a 77mm voice coil for increased linear excursion, and a powerful vented magnet assembly designed to lower distortion.  You’ll hear a pin drop and a booming soundtrack crescendo with equal clarity.

 

High frequencies are handled by the Krix patented 90 by 40 degree short throw horn, driven by a high frequency compression driver with 44mm voice coil. Each subwoofer also contains a massive 455mm driver with 100mm voice coil, dual spider and vented magnet assembly.

 

With every aspect scrutinised to deliver the most faithful reproduction of your movie soundtrack, the Krix MX-30 will allow you to truly feel the on-screen action.

 

For the ultimate cinema experience at home, play it through Krix.

 

 

Frequency Range
38Hz-16kHz in room response

Power Handling
100 – 700 Watts RMS recommended amplifier power

Sensitivity
98dB for 2.83 volts at 1 metre

Impedance
8 Ohms

Configuration
2-way

Enclosure Type
Bass reflex, front vented

Low Frequency Driver
Single 380mm (15″) high stiffness paper cone driver with 77mm (3″) voice coil of optimal length for increased linear excursion, wound on high temperature apical former and powerful vented magnet assembly designed for low distortion

High Frequency Driver
A Krix patented designed 90º x 40º short throw horn driven by a compression driver with a 1″ throat 1¾” edge-wound aluminium voice coil and Nomex former

Input Terminals
Gold plated spring terminals

Dimensions
1220mm high x 450mm wide x 335mm deep (2865mm wide including subwoofer modules)


 

Frequency Range
25Hz-500Hz in room response

Power Handling
200 – 1400 Watts RMS recommended amplifier power

Sensitivity
100dB for 2.83 volts at 1 metre

Impedance
8 Ohms

Enclosure Type
Bass reflex, front vented

Low Frequency Driver
Single 455mm (18”) paper cone driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly

Input Terminals
High level gold plated spring terminals

Dimensions
1220mm high x 750mm wide x 335mm deep (2865mm wide including LCR modules)

 

 

Recommended Room Depth
5m – 14m

Min. Screen Size 16:9
130″ (2880mm x 1620mm)

Minimum Screen Size 21:9
120″ (2806mm x 1184mm)

Please note due to Krix's Policy this can only be sold if we install.

Room Design Service

Have the cost of your room design deducted from any equipment purchased

Installation Service

Ask our friendly team about our installation service

Visit Our Showroom

121 Brunswick St, Fortitude Valley, Brisbane QLD 4006